POSTER SESSION D

Date: May 23rd 2019

PD1
ADAMCZYK Lidia
Czestochowa University of Technology, Institute of Materials Engineering, Czestochowa, Poland, EU
The Influence of Components Concentration in the Electrodeposition Process on the Protective Properties of 3,4-ethylenedioxythiophene (EDOT) with 4- (pyrrole-1-yl) benzoic acid (PYBA), Polyoxyethylene-10-laurylether (BRIJ) and Lithium Perchlorate - POSTER
PD2
AVERINA Julia
Mendeleev University of Chemical Technology of Russia, Moscow, Russian Federation
Influence of the Nature of Organic Additives on the Rate of Chemical Deposition of Nickel - POSTER
PD3
BĄKOWSKI Henryk
Silesian University of Technology, Katowice, Poland, EU
Wear Analysis of the Sapphire Wire Guide in the EDM Mashine - POSTER
PD4
BARA Marek
University of Silesia in Katowice, Sosnowiec, Poland, EU
The Influence of Distance between Electrodes used in Anodizing Process on the Properties of Aluminum Oxide Coatings - POSTER
PD5
BARTÁK Zdeněk
SVUOM Ltd., Prague, Czech Republic, EU
Metallic Coating Durability in Soil Condition - POSTER
PD7
BROŽEK Vlastimil
Institute of Plasma Physics of the CAS, Prague, Czech Republic, EU
Titanium-based Welding Anti-ballistic Cermets - POSTER
PD8
BUČKO Michal
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Application of Welds on the High-carbon Steel Rails - POSTER
PD9
EREMIÁŠ Boleslav
SVUOM Ltd., Prague, Czech Republic, EU
ENA Study of Possible Improvement in Formulation Desing Practices for Optimised Performance of Zn and Al Pigmented Epoxy Coatings - POSTER
PD10
FALTEJSEK Petr
University of Defence, Brno, Czech Republic, EU
Influence of High Temperature Plasma Nitriding on Corrosion Resistance of X12Cr13 Steel - POSTER
PD11
GWOŹDZIK Monika
Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Materials Engineering, Czestochowa, Poland, EU
Surface Morphology Analysis of X39Cr13 Steel Using for Biomedical Applications - POSTER
PD12
HADRYŚ Damian
Silesian University of Technology, Faculty of Transport, Katowice, Poland, EU
DLC Coatings in the Regeneration of Parts of Common Rail Fuel Injection Systems - POSTER
PD13
HLAVATÝ Petr
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Research of the Properties of Deposition Soldering with Embedded Tungsten Carbides - POSTER
PD14
HÝLOVÁ Lenka
Czech Aerospace Research Centre, Prague, Czech Republic, EU
The Influence of Carbon Fillers on the Electric Conductivity of Epoxy Resin and its Subsequent Surface Modification - POSTER
PD15
ISUPOV Fedor
Peter the Great St.Petersburg Polytechnic University, St.Petersburg, Russian Federation
Simulation of the Temperature Field in the Consumable Tool During Friction Stir Surfacing - POSTER
PD16
IVANOVÁ Simona
Czech Aerospace Research Centre, Prague, Czech Republic, EU
Effect of Wettability on Ice Adhesion of Metal Substrate - POSTER
PD17
IWASZKO Józef
Czestochowa University of Technology, Częstochowa, Poland, EU
Friction Stir Processing of Copper - POSTER
PD18
BARTOŇ KLUFOVÁ Pavla
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU
Corrosion Resistance of Copper-Basalt Composite Cladded by Laser - POSTER
PD19
KMITA Tomasz
University of Silesia in Katowice, Katowice, Poland, EU
Microstructure of Al2O3 Anodic Hard Coatings on EN-AW5251 Aluminium Alloy Obtained by Pulse Method - POSTER
PD20
KORZEKWA Joanna
University of Silesia in Katowice, Katowice, Poland, EU
Analysis of the Properties of the Al2O3 / IF-WS2 Surface Layers Obtained in a Three-components’ Electrolyte - POSTER
PD21
KUBIK Andrzej
Silesian University of Technology, Gliwice, Poland, EU
Application of WC/a-C:H Coating in Hydraulic Motors - POSTER
PD22
LENCOVÁ Kateřina
Research and Testing Institute Plzeň, Pilsen, Czech Republic, EU
High Temperature Corrosion Studies of HVOF Sprayed Coating in Molten Sulphate Salts Environment - POSTER
PD23
LIPIŃSKI Tomasz
University of Warmia and Mazury, Olsztyn, Poland, EU
Corrosion Rate of 1.4152 Stainless Steel in a Hot Nitrate Acid - POSTER
PD24
LOVAŠI Tomáš
University of Chemistry and Technology, Prague, Czech Republic, EU
Stainless Steel as a Materials for Fuel-cell Bipolar Plates - POSTER
PD25
MENDALA Jacek
Silesian University of Technology, Katowice, Poland, EU
The Influence of Sodium Nitrite Concentration in Inhibitor Protection of Structural Elements Working in Aggressive Environmental Conditions - POSTER
PD26
MUSIL Václav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Evaluation of Finishing Machining of Stainless Steel 1.4307 - POSTER
PD27
NGUYEN Huu Chien
University of Defence, Brno, Czech Republic, EU
The Decreasing of Porosity during Diffusion Technology - POSTER
PD28
NIEDŹWIEDŹ Mateusz
University of Silesia in Katowice, Sosnowiec, Poland, EU
Comparative Study on the Energy Condition of the Al2O3 Oxide Layer on the Aluminum Alloy - POSTER
PD29
PAKUŁA Daniel
Silesian University of Technology, Poland, Gliwice, Poland, EU
Influence of Laser Texturing on Tribological Properties of Tool Materials - POSTER
PD30
PIETRASZEK Jacek
Cracow University of Technology, Cracow, Poland, EU
Technology and Application of Anti-graffiti Coating Systems for Rolling Stock - POSTER
PD31
PRZESMYCKI Aleksander
Warsaw University of Technology, Institute of Manufacturing Technology, Warsaw, Poland, EU
Evaluation of Surface Roughness, Dimensional and Shape Accuracy of Al2O3 Ceramics in Hardened State after Milling - POSTER
PD32
SHCHERBINA Ekaterina
D. Mendeleev University of Chemical Technology of Russia, Moscow, Russian Federation
Black Nickel Plating - POSTER
PD33
SKOTNICKI Wojciech
University of Bielsko-Biala, Bielsko-Biała, Poland, EU
Comparative Studies on the Effect of Surface Preparation on the Quality of Varnish Coatings - POSTER
PD34
SKOWROŃSKA Beata
Warsaw University of Technology, Warsaw, Poland, EU
AlN Ceramics Metallization with Titanium by Means D-gun Spraying Method - POSTER
PD35
SPIRIDONOVA Anastasiya
D.Mendeleev University of Chemical Technology of Russia, Moscow, Russian Federation
Stearic Acid Modified Aluminium Alloy 5556 - POSTER
PD37
SZYMKIEWICZ Krzysztof
Institute of Metallurgy and Materials Science of PAS, Cracow, Poland, EU
Effect of Gas Nitriding on Microstructure of Ti6Al7Nb Alloy - POSTER
PD38
ŠPIRIT Zbyněk
Research Centre Rez, Husinec-Rez, Czech Republic, EU
Influence of Laser Shock Peening on Residual Stress and Fatigue Life of Stainless Steels - POSTER
PD39
ŠPROCH Filip
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Analysis of the Occurrence of Defects in Bulk or Pendant Electroplating Technology - POSTER
PD40
ŠVÁBENSKÁ Eva
Institute of Physics of Materials of the CAS, Brno, Czech Republic, EU
Impact of Laser Shock Peening on Microstructure of Silicon Steel - POSTER
PD41
TABIEVA Erkezhan
East Kazakhstan State Technical University, Ust-Kamenogorsk, Kazakhstan
Plasma-electrolytic Nitriding of 0.3Сr-1Mn-1Si-Fe Construction Steel - POSTER
PD42
VONTOROVÁ Jiřina
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Zinc - Nickel Coating and its Characterization by RF-GDOES and EDX Analysis - POSTER
PD43
WASSERBAUER Jaromír
Brno University of Technology, Brno, Czech Republic, EU
Optimization of the Surface Pretreatment of Aluminum Alloys for the Improvement of the Adhesive Properties - POSTER
PD44
WASSERBAUER Jaromír
Brno University of Technology, Brno, Czech Republic, EU
Investigation of Ni-P Coatings on AZ91 Cast Magnesium Alloy - POSTER
PD45
ZELINKA Jan
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Surface Roughness of the Machined Surface of Multiaxial Milling - POSTER
19:30 - 19:45
ANNOUNCEMENT OF THE BEST POSTER CONTEST

Back