POSTER SESSION A

Date: May 23rd 2019

PA1
BIALIK Wojciech
Silesian University of Technology, Gliwice, Poland, EU
Production of Ultra-low Ferrosilicochrome with Controlled Carbon Content and Other Elements for the Production of Innovative Metallic Materials - POSTER
PA2
BŘEZINA Michal
Brno University of Technology, Brno, Czech Republic, EU
Coupled Real-time Thermo-mechanical Solidification Model of Continuously Cast Steel - POSTER
PA3
DLOUHÝ Jaromír
COMTES FHT a.s., Dobřany, Czech Republic, EU
Effect of Copper on Properties of Dual Low-carbon Boron Steel - POSTER
PA4
DROŻDŻ Paweł
AGH University of Science and Technology, Cracow, Poland, EU
Effect of the Casting Speed and the Superheat Temperature on the Temperature Distribution for the Billet Surface in the Continuous Casting Process - POSTER
PA5
DUFKOVÁ Iva
Technical University of Liberec, Liberec, Czech Republic, EU
The Use of Steel Chips from Machining of Steel in a Geosilicate Composite - POSTER
PA6
GĄDEK-MOSZCZAK Aneta
Cracow University of Technology, Cracow, Poland, EU
Application of the Image Analysis Methods for Quantitative Description of the Al2O3 Oxide Layer - POSTER
PA7
GIL Stanislaw
Silesian University of Technolgoy, Gliwice, Poland, EU
Segregation in Terms of Chemical Compositions of Various Ordinary and Refined Ferrosilicon Fractions Following the Process of Mechanical Shredding and Sieve Classification - POSTER
PA8
HUTNY Artur
Czestochowa University of Technology , Czestochowa, Poland, EU
Investigation of EMS (Electromagnetic Steering) Conditions during Continuous Casting of High-carbon Steels - POSTER
PA9
KOVÁŘ Ladislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Structure of Free Gas Outflows From Blowing Nozzles of Thermal Aggregates - POSTER
PA10
KURKA Vladislav
MATERIÁLOVÝ A METALURGICKÝ VÝZKUM s.r.o., Ostrava, Czech Republic, EU
The Use of Numerical Simulations to Obtain the Basic Knowledge about Casting Process of Heavy Circular Ingot - POSTER
PA11
MERDER Tomasz
Silesian University of Technology, Gliwice, Poland, EU
Designing Research Methodology for Distribution of Non-metallic Inclusions in Liquid Steel during its Flow Through Tundish - POSTER
PA12
ŘEHÁČKOVÁ Lenka
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Experimental Study of Rheological Properties of Fe-C-O-Cr Alloys - POSTER
PA13
TKADLEČKOVÁ Markéta
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Numerical Modelling of Blast Furnace Gas Flow in Water Separator - POSTER
PA14
WARZECHA Marek
Czestochowa University of Technology, Czestochowa, Poland, EU
Research on Morphology and Diameter of Non-metallic Inclusions in Analyzed Steels - POSTER
PA15
WYLECIAL Tomasz
Czestochowa University of Technology, Czestochowa, Poland, EU
Research of the Scale Adhesion for a Pre-oxidized Steel Charge - POSTER
PA16
ZYWERT Marcin
AGH University of Science and Technology, Cracow, Poland, EU
The Use of Active Thermovision to Study Multi-layered Ceramic Forms - POSTER
PA17
STROUHALOVÁ Michaela
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Implementation of Method of Design of Experiment into Process of Recommendation of Liquidus and Solidus Temperatures of Ingot Cast Steel Grades - POSTER
19:30 - 19:45
ANNOUNCEMENT OF THE BEST POSTER CONTEST

Back