SEKCE B - TVÁŘENÍ KOVŮ

Datum: 22.5.2019

13:30 - 13:45
B1
PARILÁK Ľudovít
ŽP Research and Development Centre, Podbrezová, Slovakia, EU
Tube Cold Drawing Processes Using Numerical Simulation - VYŽÁDANÁ PŘEDNÁŠKA
13:45 - 14:00
B2
KOWALCZYK Karolina
Silesian University of Technology, Faculty of Materials Engineering and Metallurgy, Institute of Materials Engineering, Katowice, Poland, EU
Structure and Mechanical Properties of Low-carbon Steel after the Severe Plastic Deformation Process
14:00 - 14:15
B3
KRIVSTOVA Olga
Karaganda State Industrial University, Temirtau, Kazakhstan
Study of an Improved Method of Drawing with the Help of Simulations Using FEM
14:15 - 14:30
B4
ÇETİN Barış
FNSS Defense Systems Co. Inc, Ankara, Turkey
Predicting the Topology of the Bending Corner in Bending of Ultra High Strength Steels through Finite Element Analysis
14:30 - 14:45
B5
KULE Miroslav
NETZSCH Gerätebau GmbH, Selb/Bayern, Germany, EU
Thermal Analysis NETZSCH - KOMERČNÍ PREZENTACE
14:45 - 15:00
B6
DLOUHÝ Jaromír
COMTES FHT a.s., Dobřany, Czech Republic, EU
COMTES FHT – R&D services in metallurgy - KOMERČNÍ PREZENTACE
15:00 - 15:15
B7
SASAKI Shunsuke
JFE Steel Corporation, Handa, Aichi, Japan
Influence of Thermal History before Hot Working on Flow Stress of Multiphase Steel
15:15 - 15:30
B8
PESIN Alexander
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russian Federation
Mathematical Modeling of the Vertical Bending Phenomena on the Sheet’s Front Section at Various Stages of Plate Asymmetrical Rolling
15:30 - 16:00
COFFEE BREAK
16:00 - 16:15
B9
PRESZ Wojciech
Warsaw University of Technology , Warsaw, Poland, EU
Die Vibration in Forging Process—Influence of Direction of Vibration, Sliding and Surface Roughness
16:15 - 16:30
B10
PUSTOVOYTOV Denis
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russian Federation
Influence of Small Microscopic Grooves of Work Rolls on Strain Gradient Induced in Metal Sheets During Symmetric and Asymmetric Rolling
16:30 - 16:45
B11
LOKOTUNINA Natalia
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russian Federation
FEM Simulation of Strain Distribution Through Thickness of Multilayered Metal Composite Processed by Asymmetric Accumulative Roll Bonding
16:45 - 17:00
B12
MORAVEC Jan
University of Zilina, Zilina, Slovakia, EU
Shearing of Sheet Metal Inside the Tool with the Internal Heating Cutting Punch

Datum: 23.5.2019

09:00 - 09:15
B13
TKOCZ Marek
Silesian University of Technology, Katowice, Poland, EU
The Effects of Various Thermal Treatment - SPD Combinations on Microstructure and Properties of CuCr0.6 and CuFe2 Alloys
09:15 - 09:30
B14
PANIN Yevgeniy
Rudny Industrial institute, Temirtau, Kazakhstan
Study of the Effect of Radial-Shear Rolling on the Microstructure and Mechanical Properties of Austenitic Stainless Steel AISI-321
09:30 - 09:45
B15
KAWULOK Rostislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Influence of Wide Deformation Range on the Austenitic Transformations of the P620Q Steel
09:45 - 10:00
B16
BÜDENBENDER Christoph
Institute of Forming Technology and Machines, Hannover, Germany, EU
Numerical Investigation of Thermal and Mechanical Deviations in a Hot Forging Process of 16MnCr5 and 42CrMo Steel
10:00 - 10:15
B17
CONSTANTINESCU Dan
University Politehnica of Bucharest, Bucharest, Romania, EU
Metallurgy and Climate Changes. Heat Transfer by Conduction
10:15 - 10:30
B18
KRÁTKÁ Ludmila
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Finite Element Analysis of Deformation Behavior of Steel Headrest Restrain produced via Rotary Swaging
10:30 - 11:00
COFFEE BREAK
11:00 - 11:15
B19
KODZHASPIROV Georgii
Peter the Great St.Petersburg Polytechnic University, St.Petersburg, Russian Federation
Effect of Temperature-Strain Parameters on the Structure and Mechanical Properties of Nb, V and Ni - Alloyed Steels in Terms of High Temperature Thermomechanical Processing
11:15 - 11:30
B20
BOHNE Florian
Institute of Forming Technology and Machines, Garbsen, Germany, EU
Parametrisation of a Numerical Model for a Partial Heating Strategy Used to Evaluate a Masking Concept of a Hot Stamping Process
11:30 - 11:45
B21
MALIK Irfan Yousaf
Institute of Forming Technology and Machines, Leibniz University Hannover, Garbsen, Germany, EU
Coupled Thermomechanical Numerical Investigations of a Hot Forging Die with an Integrated Cooling System

Datum: 24.5.2019

09:00 - 09:15
B22
FABÍK Richard
ArcelorMittal Ostrava a.s., Ostrava, Czech Republic, EU
Analysis of Inhomogeneity of Mechanical Properties of Hot Rolled and Cold Stretched Ribbed Wire
09:15 - 09:30
B23
MESSAOUDI Salim
University of Biskra, Biskra, Algeria
Texture Analysis of Mild Steel Soldering Rod
09:30 - 09:45
B24
ZIDANI Mosbah
University of Biskra, Biskra, Algeria
Mechanical Behavior and Texture Evolution of Medium Carbon Steel Wires During Industrial Wire-Drawing Process
09:45 - 10:00
B25
ŠEVČÁK Vojtěch
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Comparison of Transformation Diagrams of Seamless Tubes Steels(4130, X70, P620Q)
10:00 - 10:15
B26
RESL Ondřej
Brno University of Technology, Brno, Czech Republic, EU
The Effect of Remaining Water Layer on Final Temperature of Steel Plate during Hot Rolling
10:15 - 10:30
B27
HOOTAK Maiwand
Institute of Forming Technology and Machines, Garbsen, Germany, EU
Numerical Investigations of Tool Life in Thixoforging in Consideration of the Workpiece in the Semi-solid State

Zpět